Automatic and special Marking devices

Various models, portable and fixed types.
Pin marking systems with keyboard control. 

Case with n.100 characters

Standard, premium quality MiniStress™ and DotStress™ punches/hand stamps specially engineered so that lower stress levels are introduced into the component being marked. Especially for use in the Aircraft, Nuclear and Oil industries.

Manual punches

Hand held stamps (letter punch and number punch) used for marking single characters by indenting.

All of our punches are softend at the striking end to make this end less brittle and reduce the risk of splinters.

Can be used without fear of breakage or premature character wear.

Suitable for all engineering and Industrial applications.

• Standard type Left and Right (for stamping machine) height from 1 to 20 mm.
• Micro-Stress dots type (ASME III) height from 3 to 20 mm.
• Low Stress type (continue thread with rounded off point) height from 3 to 16 mm.
• Lower case letters: height from 1 to 6 m.
• Special punches for hot steel marking are available.

Aluminum marking tubes

With plastic internal protection, with sphere point of  3,2 mm made in special abrasion resistant steel. Able to mark and write on metals, wood, plastics, cloth, concrete, etc. also on wet, oxidized or rough surfaces. Markings are abrasion resistant, high (800°C) and low temperature, acid resistant.
Available colors: white, yellow, red, green, black and blue.

Paintstick solid paint marker

Markal HT for temperature from 204 to 871°C (490 - 1.600 F).

Markal K for temperature from 982 to 1.024°C (1.800 - 1.875 F).