Magnetic Benches - Stationary Units - Metalloscopes

MX Series Magnetic Benches provide the optimal solution for the testing of small and medium-sized ferromagnetic details. Typical work pieces that can be inspected are: pressed, forged, cast pieces, machined details, e.g. for detecting cracks or breaking originating during the material forming phase, during the machining phase (typical grinding cracks), for inappropriate heat treatment (hardening cracks), rolling, welding flaws, etc… They can be used in any industrial sector: steel, automotive, aeronautical, railways, naval, chemical, etc.

Ease of use, high reliability, low cost makes it the most widely used method.

MX Magnetic Benches consist in:

• Solid painted steel frame;
• Contact heads, one fixed and one movable, for adjustment to the length of the work piece under test;
• Contact bearings in stranded copper wire or anti-flooding material, for optimizing electrical contact;
• Multi-turn coils;
• A generator;
• A/turns generator;
• Equipment calibration in compliance with the ASME standards and certification with SIT reference;
• Pneumatic device for work piece clamping;
• Manual or automatic spraying;
• Control panel with PLC for adjustment and control;
• Analog or digital ammeters;
• 400W black light;
• Optional darkening booth;
• Accident prevention devices;
• CE mark.

Model	Current AC/DC	A.Turns	KVA	Lenght [cm]	Max Diam. [mm]	Size [mm]
MX-500	2.000	10.000	15	500	65	1.600 x 1.000
MX-1000	4.000	30.000	25	1000	115	1.900 x 1.450
MX-1200	4.000	30.000	25	1.200	160	2.300 x 1.200
MX-1600	5.000	40.000	45	1.600	195	2.600 x 1.450
MX-2000	6.000	40.000	70	2.000	350	3.000 x 1.450

• 3 testing settings:

1. Detection of lengthwise flaws (electric test A);
2. Detection of crosswise flaws (magnetic test A/turns);
3. Detection of flaws of any orientation (electric A + magnetic A/turns tests).

• Flaw detection: surface and subsurface;
• A/Asp value adjustment: electronic;
• Electro-pneumatic control;
• Detection medium: magnetic powder in oil or water-based liquid suspension, fluorescent or natural light;
• Pneumatic supply: 5/6 atm;
• Power supply: 380V - 50Hz.