|
|
 |
|
|
Coating Thickness Gages for all metal substrates.
Rugged, fully electronic gages uses magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly.
|
|
|
|
|
|
|
|
EC Instruments for surface defects detection and for sorting of ferromagnetic, non ferro-magnetic and austenitic semi-finished products and mass-produced parts. Such items as bars, wire, tube, pins, rivets, nuts, bolts, valves, forgings, castings, etc. can be tested for quality factors such as hardness, strength, alloying, heat treatment, grain structure and for cracks.
Application:
Aircraft maintenance: testing for surface cracks, e.g. around rivets, on turbine blades and wheels, etc Motor vehicle and semi-finished products industries. Detection of cracks and hardness zones Metalworking industry. Cracks and material identification testing jobs Power generation industry. Testing of turbine components and heat exchangers tubes for cracks.
|
|
|
|
|
ect MAD 8D Eddy Current System
Is capable of inspecting any heat exchanger tube in the world (ferrous or nonferrous), and can do it faster than any other eddy current system. Everything that is needed to inspect any heat exchanger from the largest power plant condenser to the smallest feed water heater, all in one portable unit.
|
|
|
|
|
|
ect 48 LT
A 4 frequency 8 channel simultaneous injection multi-frequency eddy current system designed specifically for high speed heat exchanger tubing inspection applications, weighs in at only 13 pounds, occupies only 820 cubic inches, and boasts a big 13 inch 1280 x 1024 color LCD screen.
The smallest and lightest in the industry 4 frequency 8 channel inspections for both ferrous and non-ferrous heat exchanger tubes. Supports combination RFT/NFT probes for inspecting ferrous tubes Built-in CD-ROM or DVD burner for permanent data storage Built-in ect Data Analysis Software with frequency transforms Built-in ect Report Software Ect or customer supplied laptop computer
|
|
|
|
|
Remote Field Testing System for tube, pipe & plate
Application:
Non-destructive inspection of carbon steel, copper, brass, cupro-nickel, ferritic and other alloys For tube inside diameter 0.250 inch (6.35mm) and up Common usage includes boiler tubes, heat exchanger tubes, and storage tank roofs, floors, walls Used in power generation, oil and gas, pulp and paper, and petro-chemical plants Supports T4 + Saturn techniques for finned tubes Small and large bore applications Complies with ASTM standard practice E2096.05 for RFT (Remote Field Testing) of ferrous exchanger tubes Designed to meet many special applications such as flat plate and pipe inspection from the inside or outside
|
|
|
|
|
|
|
|
|
|
Features:
Superb pit detection capabilities Dual frequency processing for high sensitivity near tube supports High-quality, low noise instrumentation for a wide variety of applications Backed by Russell's highly-rated RFT training and technical support
Adept-Pro Software:
Integrates examination planning, data acquisition, analysis, and report generation Voltage plane display and analysis for maximum flaw information Specialized Remote Field analysis channels including support plate suppression and uniform wall loss signal filter
|
|
|
 |
|
|
|
Eddy Current and Remote Field probes
|
|
|
|
.
|
|
|
|
|
 "ec_6000_twin_small")
 "Small_Image004")
 "ec_ect48lt_small")
 "ec_pro1018751_small")
