|
|
 |
|
|
Rockwell Hardness Testers
|
|
|
|
|
|
Analog or digital reading, manual and automatic, with generation of Brinell and Vickers indentations.
Pre-load: 3-10 Kg
Loads: 15-30-45-60-62,5-100-150-187,5-250 Kg
Resolution: 0.1HRC
|
|
|
|
|
Universal Purpose Durometer
|
|
|
|
Analog or digital reading hardness tester with manual cycle for Rockwell, Brinell and Vickers testing
Pre-load: 10Kg
Loads: 30 - 31,25 - 60 - 62,5 - 100 - 150 - 187,5 Kg
Resolution: 0.2HRC
Readout by microscope (50x25x) or digital ocular.
|
|
|
|
|
|
Vickers Hardness Testers
|
|
|
|
|
|
|
|
Vickers 1-50 OD
Vickers automatic and digital reading hardness tester.
Test loads: 1 - 50Kg.
|
|
|
|
Vickers 1-50 AC
Vickers automatic and computerized reading hardness testers.
Test loads: 1 - 50Kg.
|
|
|
|
Vickers and Knoop methods.
Semiautomatic micro-hardness testers that automatically produce Indentations, manually carry out indentations measurements by means of digital micrometric eyepiece and automatically establish micro-hardness value.
Automatic micro-hardness testers with manual specimen holder crosstable automatically carry out the measurements of Vickers and Knoop testing.
Able to make automatic measure and profiles of micro hardness value, it can be equipped with up to four numerical controlled axes, becoming a real micro hardness testers robot.
Go to brochure.
|
|
|
|
|
Brinell Hardness Testers
|
|
|
|
|
|
BRIN-200A 3.000Kg. UKAS certificated.
Easier to use with more accurate results and record keeping.
Measurement of the indentation is via an electronic micrometer giving an instant display of the hardness value – which is simultaneously printed.
If the component tested is part of a batch then the printer will also print comments – whether it is within limits, the hardness scale used, as well as the number of good components in the batch, the number of rejects, the time, the date, the batch number, the batch mean and standard deviation.
The machine is supplied complete with a serial port enabling the test data to be further processed by a remote computer.
Other technical features:
Available scales:
HB 10/3000 - HB 10/1500 - HB 10/1000 - HB 10/500 - HB 10/250 - HB 5/750 - HB 5/250 (HB 2,5/187,5 on request)
Optional features:
|
|
|
|
|
|
|
BRIN-200D 3.000Kg. UKAS certificated.
No operator measurement – higher speed, accuracy, reliability and ease with proper records and a high level of confidence in the test results.
The BRIN200D uses "state of the art" electronic technology.
The test forces are applied using the traditional lever and weight method. The operator interface is via industrial membrane keyboard sealed to IP65 or via optional touch screen. The Brinell hardness is measured in the authentic way and the test result is displayed on the monitor, test results are saved to disc as they are displayed and may be printed out at the end of the batch together with some statistics if required.
Automatic measurement adds only about 1 second to the cycle time and is consistent and independent of the operator. Batch testing may be interrupted to make individual tests.
Other technical features:
Available scales:
HB 10/3000 - HB 10/1500 - HB 10/1000 - HB 10/500 - HB 10/250 - HB 5/750 - HB 5/250 (I2,5/187,5 on request
Optional features:
Automatic time cycle Motorized screw
|
|
|
|
|
|
|
BRIN-200M 3.000 Kg. UKAS certificated.
With micrometer measurement of indentation diameter on built-in screen.
Easier to use with more accurate results.
Production Brinell hardness tester, test force application by traditional lever and weights with motorized hydraulic lift of lever.
Optical projection of image with x 14 magnification onto an integral graduated screen, where it is measured by micrometer. This reduces operator fatigue and speeds up testing.
Other technical features:
Available scales:
HB 10/3000 - HB 10/1500 - HB 10/1000 - HB 10
|
|
|
|
|
|
|
BRINscan MKIII UKAS certificated.
Is a heavy duty high speed production Brinell hardness tester with automatic cycle, and BRINtronic fully automatic Brinell microscope.
Fully automatic measurement – no operator influence Displays test results in HB and mm in less than a second Test results are stored on disk and may be printed out Can communicate with a remote computer Testing a batch may be interrupted to make one or two tests and then resumed Relays to permit after test sorting Batch summary (batch size, match mean, standard deviation, no. of high and low rejects, date, time, batch number etc) Measures indentations on normal industrial hand prepared surfaces Test results are saved in the event of a power failure Measures indentations authentically per ISO6506
|
|
|
|
|
|
|
BRINtronic-LT UKAS certificated.
Brinell fully automatic microscope.
Fully automatic - no measurement by the operator and no operator influence on the results. Fast - displays test results in HBW and mm in tenths of a second. For use on normal industrial hand prepared surfaces as well as mirror finish reference blocks, nothing special required. Suitable for both shop floor and laboratory use, and ideal for settling disputes. A modular construction allowing the user to replace components on site and featuring a 4.6M armoured cable, steel bodied microscope unit with military style connectors, free standard software upgrades, and simple change over of all components, even a new laptop can be fitted on site and a special securing foam supplied (BRINtronic-LT). The microscope unit features internal logic to ensure that the correct calibration data is used for every test regardless of the microscope unit used (where more than one is available). Results provided in HBW and mm, and available to 2 decimal places (HBW) and 4 decimal places (mm). Measures indentations made with 2.5mm/5mm or 5mm/10mm indenters (depending on microscope unit).
Software features include:
Print out batch summary (batch size, batch mean, standard deviation, no. of high and low rejects), with or without individual test results. Bespoke software available. User interface in a wide variety of languages including Chinese, Japanese, Korean, Russian, as well as European script. Fully networkable - can communicate with a remote computer and download/upload batch data if so required. Automatically saves test results to hard disk, option to save images. Facility to interrupt batch testing to make individual tests and then resume batch without data corruption. Software signals if batch limits are violated, batch range, and standard deviation of results. Information parameters can be user defined including annotation of individual results.
BRINtronic-MD Same features of the LT model, but without case and laptop.
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
Brinell hardness tester 3.000 Kg. Portable. UKAS certificated - Model 134
Composed by:
Applyes the full 3.000Kg test force on 10mm ball - other test forces and indenters available Applies the full test force with an accyracy of +-0.5% May be equally well used as a bench machine or may be taken to the job Used is any position - in any location the tester is always accurate Removable test head and standard accessories make its application almost unlimited Special adapters can be supplied
Click here for other models and accessories.
|
|
|
 |
|
|
|
Chain base, portable Brinell hardness tester 3000 Kg for pipes, big forgings, etc.
|
|
|
|
Portable Hardness Testers
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
Brinell hardness tester 3.000 Kg on wheels. UKAS certificated.
Ideal solution for plate, billets and high thickness pieces.
|
|
|
 |
|
|
|
BRINscope manual Brinell Microscope
Special 3-way precision ground pre-focused lens system requiring no adjustment Stainless steel, practically indestructible, lenses protected... Integral battery gives the correct illumination for accurate measurements and best agreement between operator Retractable stand x20 or x40 magnification Narrow nose for reading impressions where other microscopes will not fit LED light source gives superb optical clarity and with battery life proven in tests to give over 360 hours useable illumination!
|
|
|
|
|
|
|
|
Dynamic hardness tester
The DP 300-D uses the "dynamic/rebound" method of hardness testing.
Tests take only a second. Hardness values are displayed digitally and converted to Brinell, Rockwell B and C, Shore and Vickers scales.
A built-in data recorder is a standard feature as is a Data Transfer Software program and interface cable.
The applications include: steel rolls, dies, welds, forgings, shear blades, mechanical components, molds, some pipe and plate, rod stock etc.
Material which can be tested include: steel, cast steel, gray and ductile irons, tool steel, aluminium, brass/bronze and copper, stainless steel.
Included in the standard package:
- DP 300 Unit
- D-type impact device with 1.5 meter cable,
- RS-232 interface cable
- Data transfer software program
- D-Test block
- Cupling paste
- Cleaning nrush
- Battery pack
- Carrying case
- Operation instructions
|
|
|
|
|
|
|
EQUOTIP series
Portable measurement instruments for hardness testing on metallic materials. Possibility to do a lot of measures. All values are displayed in less than one second with ± 0,5% precision. Different impact bodies are available for different applications. Immediate visualization on the display of the hardness value at the selected scale (HRC, HB, HV etc.).
Main menu features:
Scales conversion Measure series number Mean value Limit values Impact direction Data output
|
|
|
|
|
|
The portable EQUOSTAT hardness tester is typically dedicated to small and light weight pieces, low thickness (0,2-26 mm) and with superficial coatings.
The same electronic supports all Equotip impact devices
.(D-G-E- etc).
|
|
|
|
|
|
|
|
Misuratore di Durezza Portatile a Spina Tarata per prove Brinell da 100 a 700HB. Versione dinamica a martello e statica a morsa.
Durometro portatile Poldi
|
|
|
|
|
|
Test Blocks
|
|
 "hv_kingbrinellplusmicroscope_small02")
