Cut-off Machines
Cut-off wheels 200-230-250-300-400 mm.

Automatic Mounting Presses for specimens of 30 or 40 mm dia.
All process parameters can be preset and are automatically controlled during the mounting process.

Manual punches Figures and letters.

• Standard type Left and Right (for stamping machine) height from 1 to 20 mm.
• Micro-Stress dots type (ASME III) height from 3 to 20 mm.
• Low Stress type (continue thread with rounded off point) height from 3 to 16 mm
• Lower case letters: height from 1 to 6 m.
• Special punches for hot steel marking

Case with n. 100 characters Letters, digits, dots, 20 spacers. Character height: from 1 to 10 mm. Standard and dot characters.

Grinding/Polishing Machines with one or two discs 200/230/250/300 mm dia.

Metallography consumables

• Abrasive cut-off wheels
• Diamond blade
• Abrasive disks
• Diamond grinding disks
• Polishing cloths
• Alumina
• Hot and cold mounting resins
• Thermosetting resins
• Accessories
• Grinding papers
• Diamond products: paste, spray, suspension

Programmable Machines for fixed and variable marking applications

Sphere markers Aluminum tubes with plastic internal protection, with sphere point of  3,2 mm made in special abrasion resistant steel. Able to mark and write on metals, wood, plastics, cloth, concrete, etc. also on wet, oxidized or rough surfaces. Markings are abrasion resistant, high (800°C)and low temperature, acid resistant. Available colors: white, yellow, red, green, black and blue.  Case of 10 pieces. Available also chalk markers for ambient and high temperature.

.