• Display:
  240 x 320 Graphic (2.3"W x 3.1"H)
  Backlight - On / Off / Auto with reading Last reading hold
• SplitView: (Handheld Industry First)
  Main Trace Window: 100 - 10% in 10% Incr.
  Split View Window: 10% - 100% in 10% Incr.
  as a Function of Main Trace Window Size
• SplitScan: (Handheld Industry First)
  Display A-Trace and B-Scan Simultaneously
• AutoTrack: (Handheld Industry First)
  When in SplitView, Second Window Displays
  a Zoom View of the Main A-Trace which Tracks
  The Echo Being Measured
• Screen Freeze Mode
• Physical:
  3.25" Wide X 1.4 Deep X 7" Long
  All Aluminum with gasketed end caps
• Range:
  0.005" - 20" Total incorporating 40" Delay
  Resolution - 0.0001" •Inch/mm selectable
• Velocity Range:
  0.0490 to .9999 in/us • fully adjustable.
• Calibration: Range, Delay, Velocity & Zero
• Pulser / Receiver: Up to 300Hz Rep Rate,
  Unique and Adjustable IP Supression Mode
• Display Mode: RF, +HW, -HW, FW
• GAIN: User selectable gain 66dB with 96dB Attenuation • 500Khz - 20MHz

Quantum TE
Ultrasonic Flaw Detector, fast-update, hand held.
Weighs 6.4 pounds (2.9 kg) w/ 5 D-cell batteries. Built-in precision thickness gage.  Easy to read ultra fast LCD display. A-trace with digital thickness readout. New user-friendly menu structure with help screens for every menu item.  User defined screen setup provides four screen presentation modes. Membrane push button controls. Direct access to range, delay & gain controls as well as various menus through a new direct access keypad. Five user definable keys allow the user to customize the instrument to meet specific user requirements.

Features 115 dB gain; square-wave type pulser continuously adjustable from 50 - 400 volts; IP/IF/delay sync; 16 step variable damping adjust; linear reject; broadband and tuned receivers 0.5, 1.0, 2.25, 5.0, 10.0 MHz; blocking gate; 50 set up memory locations; echo displays: full wave rectified, plus or minus half wave, RF, full scale extended range of 200 inches (5 meters); RS-232C I/O port; last value thickness hold, (2) flaw gates, flaw and thickness alarms, flaw triangulation. DAC / DAG & weld curves meet any inspection requirement probe connection through BNC connectors.

Uses 5 D- cell alkaline or Ni-Cad batteries for up to 35 hours of continuous use. Shipped complete with AC charger/eliminator, rugged carrying pouch with shoulder strap, BB-01 cable, couplant bottle, QPC1 computer/printer interconnect cable, and QSETUP set up & transfer program.

Avenger EZ
Ultra-Compact Ultrasonic Flaw Detector

Main features:

• User Friendly, Cursor Driven, Plain Text MenusThickness &Amplitude Gating
• EASY Grip Aluminum Sealed Case
• 7"H x 3.25"W x 1.4"D
• Encoded & Scrolling AmpScan & B-Scan
• Embedded Probe Library
• 2 MByte Data Logger
• Scrollable "SpreadSheet" View
• High Speed Scan Mode
• Single Point Calibration
• 2 Point Calibration
• 300Hz Rep Rate!!
• High Speed LCD Display
• Only 3 'AA' Batteries
• RS-232 I/O
• Optional USB
• English / Metric
• Backlight

ALL NEW Productivity Features:

• SplitView: Dual Timebase A-Trace
• SplitScan: A-Trace & B-Scan
• AutoTrack: Tracking Zoom Window
   

SplitView RF Small
Main Window

SplitView RF

SplitView RF Large
Main Window

SplitScan
RF and B-Scan

NDTS90 CRT Based
Ultrasonic Flaw Detector

Developed specifically to meet CURRENT customer requirements and requests for a High Speed, CRT based unit. Why CRT? CRTs are naturally easier on the eye and present the user with a virtually infinite resolution display as compared to digital displays, allowing easier perception of indications along the baseline. Most other digital units strive to present an infinite number of points within 640 points total across the horizontal baseline... assuming menu space does not occupy any of the horizontal display

In a world gone totally digital, the NDTS-90 provides the best compromise between the digital and analog world by offering a graphic user interface where controls are represented by images of associated controls. Simply touch the control and use the available knob or graphic Scroll Bar for faster operation.

The Quantum QFT 100 & 200 Series
Portable Ultrasonic Flaw Detectors

Handheld Ultrasonic Flaw Detectors are truly a major breakthrough in ultrasonic flaw detection. NDT Systems engineers have developed methods to drive the ALL NEW, High Contrast Black & White backlit LCD display to unprecedented speeds, offering more dynamic waveform displays in the brightest of sunlight.

The new intuitive menus put all functions right "up front" thereby making them more operator instinctive. Setup and operation are very quick operations with direct access to flaw, shear and thickness modes. Built in help screens are on-line and available with a simple keystroke whenever you need them. There is virtually no need for a users manual.

Broadband and tuned frequency selections of 0.5, 1.0, 2.25, 5.0 and 10.0 MHz are standard features. RF, positive and negative half wave, and full wave rectified waveforms can be presented as either hollow form, filled or reverse field. The Quantum series was the first in the industry to offer an LCD display to be easily viewed in any light condition, day or night.

The QFT Series offers an optimized combination of penetrating power and resolution. The powerful adjustable 50-400V square wave and high gain broad band receiver measures thick attenuative materials up to 200 inches (5077mm) and at the other end of the spectrum can measure below 0.010" with an appropriate high frequency delay line transducer. The QFT Series resolving power even permits many coatings, including some plastic coatings as thin as 0.0050" (0.125mm) to be measured.

The QFT 200 Features a Color Coded Direct Access Keypad, DAC, DAG, Weld Curves, Weld Trig, 2 Flaw Gates, Peak Echo Hold, Zoom, User Definable Option Keys, Tilt Stand & More. An optional Data Logger is available.

The QFT Series offer superb sunlight viewability and a 7+ hour operation time between charges all in a 3Lb hand held package.

QFT200 - The Smallest, Lightest, Most Capable Handheld Ultrasonic Flaw Detector Available

QFT100 - Highly capable entry level hand held Ultrasonic flaw detector

Curlin Air
Airborne Ultrasonic Flaw Detector

Weighs 6.3 lbs. (2.9 kg) including batteries. Easy to read ultra-fast LCD display A-trace. User-friendly menu structure with context sensitive help screens for every menu item.  Membrane push button controls. Direct access to range, delay & gain controls, audio/visual flaw alarms, as well as various menus through a new direct access keypad.  Features 115db gain. Uses 5 'D'-size alkaline or rechargeable NiCad batteries for about 24 to 8 hours, respectively, of typical use (with optional LCD backlight off). Shipped complete with Curlin Air gage (p/n 150-00000), AC charger/eliminator (p/n QTEBE), and rugged carrying pouch with shoulder strap (p/n TEP1), hard-shelled pelican travel case (p/n 19-51035) and Operating Manual.

Click for information PDF

The PortaScan 007
Portable Imaging System

Is used to detect corrosion on oil platforms in the North Sea, in pipelines and tank farms from Alaska to the Kingdom of Saudi Arabia, and airplanes from Seattle, Washington to Shanghai, Peoples Republic of China.
Need to test a number of places in hard to get at areas? Easy. The PortaScan 007 Ultrasonic Imaging System can collect data from scanners up to 150' (45 m) away using the optional 007CCB150 control cable bundle. Do your tests require both single and dual element transducers? Simple. Just recall the test set up from the built in Quantum ultrasonic instrument, slip the appropriate transducer and insert into the holder and begin testing. Store or retrieve images with header data, and immediately evaluate easy to read "C" scan, "B" scan, 3D and spreadsheet displays of actual recorded values. The 007 also exports the acquired data in an ASCII format for use in spreadsheets or other evaluation programs.
The PortaScan 007 is best suited for applications where high resolution and high definition are required, such as corrosion / erosion and where raw collected data needs to be imported into other systems.

Click for information PDF

The PortaScan LT is used primarily for flaw detection and angle beam evaluation. Features include a notebook based PC, 40MHz PCMCIA digitizer card (an industry first), and a Windows based operating system. Acquisition features include the ability to capture A Scan, B Scan, C Scan P Scan TOFD and others. Several optional scanners are offered for use with the PortaScan LT. The PortaScan LT is best suited for applications where angle beam inspection is desired. The PortaScan LT can be optionally configured as an automated system.
Although the PortaScan LT can be used for corrosion work it is will not provide the level of detail and flexibility the PortaScan 007 will provide.

TG210 & TG410
Ultra-Compact Ultrasonic Thickness Gages

Bigger Is Not Always Better! The All New Nova A-Trace Series of Thickness Gauges define a new standard for performance, features and portability in Handheld Ultrasonic Thickness Gauges. This ALL NEW Nova Series offers Pulse Rep Rates up to 300Hz, With Display Updates of 30Hz, fast enough for all but the most demanding applications. With the introduction of three NEW, Industry Leading Features including SplitView, SplitScan and AutoTrack The New Nova Series possibly presents the best features for price in High Performance Thickness Gauges today. The high speed, fully sunlight readable, backlit display offers Quarter VGA resolution. The resolution of the display will appear to approach analog! User interface is via simple plain text menus located at the bottom of the display. Large numeric display zone offers full 7/16" high characters representing Thickness. Please call for more information.

Click for information PDF

The Nova TG110DL
Ultrasonic Thickness Gage

The Nova TG110DL is truly an innovation in, defining the standard for performance and value in Ultrasonic Thickness Gages. It would be difficult, if not impossible to find an ultrasonic wall thickness gage offering the long list of STANDARD features the TG110DL does. For about the price of the competition's current fixed velocity, entry level gage, NDT Systems, Inc. offers a full featured thickness gage. Features include 0.022" - 50.000" (0.56mm - 1270mm) thickness range, AutoZero, AutoHold, up to 200 hour battery life, and Inch/Metric user selectable units. Size: 5" X 2.625" X 1.25" and weighs only 11oz!!

Click for information PDF

The CB110 Sonic Tester for cylinder bore inspection, head porting, chassis & body members, roll cage, thickness inspection and more...

NovaScope 5000
High Speed Precision Ultrasonic Thickness Gage

The advanced design of the NovaScope 5000 Precision Ultrasonic Thickness Gauge covers a variety of ultrasonic thickness gaging applications ranging from those requiring delicate high resolution to those demanding hefty penetrating power and high sensitivity. The special ultrasonic capabilities of the 5000 lend are used on complex, difficult or ultra-critical applications.
Standard features on the NovaScope 5000 include 0.0001" digital resolution from as low as 0.005 to .9999" and .001" digital resolution from 1.0" to 10.0" thickness. The four digit LED is English or Metric selectable. The High Speed CRT displays the A-trace in full RF or rectified RF along with gates. Outputs of the 4500 includes alarms, analog thickness, serial RS-232C, IP sync, thickness amplitude control TAC for noise suppression, includes switch to permit use of single or dual transducers. High-speed binary output is included for use with the Portascan or other color scan imaging systems.

Click for information PDF

Nova 900 Series
Precision Digital Ultrasonic Thickness Gages

Now available in both handheld and bench top versions, from 4 key simple to full featured. Some standard features include High Speed Pulse Rep Rate, 0.0001 Resolution to a minimum of 0.0035 (probe & application dependent) AutoSet, B-Scan and 50,000 Point Logger as well as storage of 30 custom user Setups on 930 Handheld & 950 Bench top, Delta Mode, High & Low Alarms, Thickness/velocity readout, High Speed LED Numeric Display (readable up to 10 feet away) and LCD Menu display on Bench Top, High Contrast LCD Display on Hand Held, English/Metric units, RS-232C on Hand Held as well as RS232 and USB digital I/O port on Bench Top, NiMH batteries, scope outputs, ac power module/battery charger.

Click for information PDF

Eclipse TG2
Portable Ultrasonic Thickness Gage with built-in A-Trace display and data logger

Handheld, weighs 3 lbs (1.4 Kg) & includes batteries. Easy to read LCD display A-trace. Digital thickness readout. Membrane push button controls. Features include: manual gain and AGC; 115 db gain; square-wave type pulser, continuously adjustable from 50 - 400 volts; delay sync; IP/IF sync; damping adjust; linear reject; blocking gate; 50 set up memory locations. Echo displays: Full wave, +/- half wave, RF or full wave filtered; full scale extended range of 50 inches (1,270mm); RS-232C I/O port; screen/image freeze; minimum thickness hold. Shipped complete with QCP1 chest carry pack, one QBP-2 battery packs, QBC1 quick charge battery charger, ML-01 cable, QPC1 computer/printer interconnect cable, QSET set up transfer program.

Optima Series
General Purpose Transducers

Are available in Fingertip Contact, Rugged Contact, Standard & Miniature Angle Beam as well as Immersion and Dual Element Transducers. The Optima Series are premium series ultrasonic transducers, optimized for NDT Systems, Inc. instrumentation but are equally compatible with any manufacturers' instrumentation. Optima Series Transducers are available for both Flaw Detection and Thickness Gaging applications.

Nova Series
Precision Thickness Gaging Transducers

Ultrasonic transducers tailored for thickness gaging instruments manufactured by NDT Systems. These transducers are also an excellent choice for optimum thickness gaging on virtually any instrument. These transducers incorporate our Patented AutoProbe recognition technology for optimum instrument setup.

Cables for probe/UT instrument connection
BNC, MiniBNC, LEMO-1, LEMO-00, MICRODOT, SELECTRO, UHF.

Adaptors BNC/LEMO

Certificated Reference UT Blocks
V1, V2, with FBH of various diameters, heights and materials.
Blocks according to ASME, ASTM, AWS, IIW, MIL NAVSHIP, BPR standards.
Step certificated blocks for thickness.
UT coupling agent also for high temperatures.

IRIS Ultima

For on-service control of exchangers.
Compact single module construction.
Operates in Imperial or Metric measure.
Stores up to 2.0GB of results/reports. That's up to 1,021,428 snapshots. Larger hard drives available.
Reports/snapshots images. Print when/wherever you like.
CD writer, 3 1/2 Floppy, TFT Screen
2 Data Review programs: 1 in DOS - IRISD
1 in Windows - IRISV
Data can be imported in to any word or write programs within the Windows work group for effective reporting and printing of both rectangular and circular views of image profiles in color or black & white.
Calibrates from internal menu.
Warns operator of incorrect setup.
Full length tube position indicator for snapshot location.
"C" SCAN PROFILE.
Instant review of saved data.
IBM PC system compatible with most clients' PC
equipment.
Turbine speed range 600 - 3600 rpm. Low RPM warning.
Random snapshots in tube at operator's discretion.
Unlimited images per tube. Individual/ continuos images.
Tube inspection range from 0.36"ID to 14"ID.
Inspects most ferrous and nonferrous materials.
Prints snapshots on computer printer. Black & white / color.
Modem for transfer of inspection files to other locations.
Encoder for accurate image position.

Click for information PDF

Digital Ultrasonic Instruments For low frequencies test of concrete, marble, granite, bricks, composite, glass and carbon fibre. For material uniformity evaluation, failures detection, damages, manufacturing defects, defects induced by fire or cold temperature, Young’s modulus evaluation, etc. Visualization of time of fight and of UT velocity.
Alphanumeric representation and  A-Scan color LCD dot matrix (TFT) 211 x 158 mm. - 640 x 480 pixels (VGA).
Interfaces: serial RS232 - parallel Centronics - Analogic - PCMCIA.

.