Home Magnetic Particle Inspection Products and consumables for MPI

Products and consumables for M.P.I.

The consumables for MPI control distributed by TemaFlux are the ideal choice for those seeking high-quality consumables.
With our wide range of products, the speed of distribution, the possibility of customization and the constant commitment to innovation and quality, we are ready to meet the needs of our customers in an efficient and professional way.

Availability and rapid shipments

We are committed to keeping standard products always available and ready for delivery from our warehouses.

We offer an efficient distribution throughout the national and European territory, guaranteeing fast and reliable delivery times.

Excellence of magnetic powders

TemaFlux magnetic powders are selected from among the best in the world, ensuring the detection of defects on materials with superior sensitivity, brilliance, sharpness and definition.

The use of our powders makes it possible to identify defects with extreme precision, increasing the reliability of inspections.

Customization and certifications

We offer the possibility of providing special and customized products, adapted to the specific needs of clients.

Upon request, we can provide products with special certifications, thus ensuring suitability and compliance with the required standards.

Complete documentation and compliance

For each product, TemaFlux provides, upon request, complete and detailed documentation.

The documentation includes the technical data sheet, the safety data sheet and the declaration of conformity.

This ensures that customers are fully informed about the characteristics and safe use of the products.

Service and technical support

TemaFlux is committed to providing exceptional customer service, with a team of experts always available to answer technical questions and provide support.

Wet fluorescent magnetic powders

TYPE

APPLICATION

PARTICLE SIZE (MICRON)

RECOMMENDED CONCENTRATION (GR/LT)

VOLUME OF PARTICLES DEPOSITED IN ASTM BURETTE (ML)

PF-7500 Semi-finished 2-5 0.3-2.0 0.03-0.2
PF-8500 Processed <3 0.1-2.0 0.02-0.32

Wet natural light magnetic powders

TYPE

COLOR

PARTICLE SIZE (MICRON)

CONCENTRATION (GR/LT)

PF-800/4 Black 5-20 10-20
PF-900 Red 5-30 10-15
PF-950 White 5-30 10-20

Ready-to-use oil-based magnetic liquids

TYPE

COLOR

APPLICATION

PARTICLE SIZE (MICRON)

RECOMMENDED CONCENTRATION (GR/LT)

VOLUME OF PARTICLES DEPOSITED IN ASTM BURETTE (ML)

LF-7500 Fluorescent Semi-finished 2-5 0.3-2.0 0.03-0.2
LF-8500 Fluorescent Processed <3 0.1-2.0 0.02-0.32
LF-800/4 Black Processed 5-20    
LF-900 Red General use 5-30    
LF-950 White General use 5-30    

The innovative carrier oil for magnetic particles (also called kerosene oil, MI MT 1100) LF-101 is the basis for the preparation of all the magnetic liquids of the LF series. This special oil has been developed to solve or minimize the fire hazard that usually accompanies the use of oil-based products in magnetic imaging. The fundamental comparison parameter for the determination of the fire hazard is the flash point, which for AMS 2641 and ASTM E709 regulations must be higher than 93°C. In LF-101 it was raised to 135°C.

Spray products – Chemetall

TYPE

COLOR

Lumor J (formerly Ardrox 8530) Fluorescent
Supramor 4 Black (formerly Ardrox 800/3) Black
Ardrox 8901W Contrast white lacquer

Oil for magnetoscopy

TYPE

SPECIFICATIONS

LF-101 High flash point (135°C)

The innovative carrier oil for magnetic particles (also called kerosene oil, MI MT 1100) LF-101 is the basis for the preparation of all the magnetic liquids of the LF series. This special oil has been developed to solve or minimize the fire hazard that usually accompanies the use of oil-based products in magnetic imaging. The fundamental comparison parameter for the determination of the fire hazard is the flash point, which for AMS 2641 and ASTM E709 regulations must be higher than 93°C. In LF-101 it was raised to 135°C.

Magnetic concentrates to be diluted in water

TYPE

COLOR

APPLICATION

PACKAGING (LT)

CONCENTRATION (LT)

LM-7500 Fluorescent Semi-finished/Processed 1 and 5 40-50
LM-800/3 Black Finished 1 20-30
LM-900 Red General use 1 20-30
LM-950 White Dark backgrounds 1 20-25

Additives for water

For the use of magnetic powders in water, special additives are necessary: wetting – anti-rust – anti-foaming. If the already premixed types are not used, it is necessary to mix powder and additives before pouring them into water.

TYPE

APPLICATION

CONCENTRATION (ML/LT)

LM-40 Wetting agent, Anti-rust and Anti-foam for Magnetic
Powders type PF
10-20
LM-80 Anti-rust for general use (suitable for ultrasonic control) 10-15
6333 Cleaner, Degreaser 10-20
SIL-50 Antifoaming agent 0.1

 

Contact us for more information




    Fields marked with * are mandatory.

    Do you want more information about our offer of solutions for non-destructive testing? Do you want more information about our offer of solutions for non-destructive testing? Do you want more information about our offer of solutions for non-destructive testing? Do you want more information about our offer of solutions for non-destructive testing?

    Do you want more information about our offer of solutions for non-destructive testing? Do you want more information about our offer of solutions for non-destructive testing? Do you want more information about our offer of solutions for non-destructive testing? Do you want more information about our offer of solutions for non-destructive testing?

    Do you want more information about our offer of solutions for non-destructive testing? Do you want more information about our offer of solutions for non-destructive testing? Do you want more information about our offer of solutions for non-destructive testing? Do you want more information about our offer of solutions for non-destructive testing?

    Contact us